Accessories for telescope mounts & tripod
Brand: iOptron
Product Code: 58252
Product description:
Telescope and spotting scope vibration is caused by windy conditions, an unsteady mount or tripod or even an accidental bump to the instrument, and results in reduced image quality.
Celestron's set of three Vibration Suppression Pads will reduce vibration time by almost..
59.00€
Ex Tax:48.76€
Brand: Kenko
Product Code: F_239845
SKYMEMO S equatorial wedge is equipped with an U3/8 screw both on the upper-side and the down-side.
The upper-side screw allows you to directly attach your SKYMEMO S portable tracking platform, while the down-side screw can be attached to a tripod with no need of an extra pan-head.
It makes this m..
84.90€
Ex Tax:70.17€
Brand: iOptron
Product Code: 71585
Product description:
The extension for the counterweight rod enables a greater leverage of the counterweight. So you can achieve a big impact with a relatively small counterweight and have more leeway to balance the mount...
89.00€
Ex Tax:73.55€
Brand: iOptron
Product Code: 61865
Item description:
Additional counterweight for your mount..
89.00€
Ex Tax:73.55€
Brand: iOptron
Product Code: 65126
Product description:
Replacement Lithium-Ion (Li-ion) rechargeable battery for iOptron AZ Mount Pro mount.
Features:
Assemble with 6 cylindrical 18650 high quality 3.7V Li-Ion rechargeable battery pack
Capacity 4400mAh
Voltage 11.1V, peak at 12.6V
No memory effect
Longer storage life than N..
89.00€
Ex Tax:73.55€
Brand: Kenko
Product Code: F_119522
The Kenko SKYMEMO can also be used with field scopes, which normally provide difficulty when determining accurate view ranges through traditional manual methods.
It allows the SKYMEMO mini to tilt up to 90 degrees and has 4 individual thumb screws for making minute adjustments to the position of th..
94.90€
Ex Tax:78.43€
Brand: iOptron
Product Code: 68928
Product description:
Mounting plate for the tripod head. Serves to attach the iOptron SkyGuider...
99.00€
Ex Tax:81.82€
Brand: iOptron
Product Code: 55779
Product description:
Fits, for example, the iEQ30, ZEQ25 or the AZ Pro from iOptron, but of course also any other mount with a 20 millimetre diameter counterweight rod..
99.00€
Ex Tax:81.82€
Brand: iOptron
Product Code: 61991
Product description:
The wedge is mounted between the tripod and mount, or tracking unit. This allows the mount to be aligned equatorially so that the tracking axis is then parallel to the Earth's axis...
99.00€
Ex Tax:81.82€
Sale
Brand: Explore Scientific
Product Code: 0456103
Optical pole finder scope for fast and precise polar alignment of the EXPLORE SCIENTIFIC iEXOS-100 EQ mount. The EXPLORE SCIENTIFIC Pole Finder Scope is used with the EXPLORE SCIENTIFIC iEXOS-100 EQ mount (Art. No. 0456100) and allows a very precise alignment to the celestial pole by unsing the illu..
108.73€ 114.45€
Ex Tax:89.86€
Brand: iOptron
Product Code: 26780
Manufacturer's product description:
Extra counterweight
Our expert comment:
Since January 2021, these iOptron models have a 28mm diameter counterweight bar and therefore the hole diameter on the counterweight is also 28mm.
(Jan Ströher)..
119.00€
Ex Tax:98.35€
Brand: iOptron
Product Code: 26779
Product description:
iOptron counterweight shaft extension
This extension shaft can be screwed onto the original shaft, thus increasing the effect of counterweights by the longer lever action. Of course, the original counterweights also fit onto the shaft...
119.00€
Ex Tax:98.35€
Brand: iOptron
Product Code: 52983
Product description:
With these adapter, you can install your mount onto this sturdy yet portable iOptron Tri-pier.
Similar to picture. (Tripod not included)..
119.00€
Ex Tax:98.35€
Brand: iOptron
Product Code: 50362
Product description:
This R.A. worm upgrade kit works for all iEQ45 mount. The package includes:
1X high precision RA worm
2X ball bearing
1X pulley
1X end cap
1X PE encoder wheel
1X washer, and
1X screw
For old version iEQ45 this worm upgrade may improve the mount performance. The new ..
123.95€
Ex Tax:102.44€
Sale
Brand: Bresser
Product Code: 4951400
This BRESSER RA-Motor for a more comfortable tracking of your telescope. Including controller.
Suitable for BRESSER Pluto, Galaxia, Quasar and Skylux telescopes, and all BRESSER carbon look telescopes with EQ-Sky and EQ3 mount.
Important note: Not suitable for BRESSER Space Explorer and First..
124.59€ 131.15€
Ex Tax:102.97€
Brand: iOptron
Product Code: 52186
This iOptron secondary dovetail saddle attaches to the iOptron AZ Mount Pro, MiniTower Pro, and MiniTower II altazimuth mounts to allow two telescopes (or a scope and a DSLR camera/lens combination) to be used on the mount simultaneously.
The secondary dovetail saddle mounts on the opposite side ..
129.00€
Ex Tax:106.61€
Brand: iOptron
Product Code: 51902
Product description:
This counterweight package is designed for iOptron SkyTracker Pro camera mount to balance a heavy payload/long camera lens. It also fits to SkyTracker mount...
129.00€
Ex Tax:106.61€
Brand: MEADE
Product Code: 69030
With this adapter, you can operate your ETX 80 DS-2000 ETX-90/105/125 LT Lightswitch
LX65
LX85
LX90
LX200
LX400
using a 230V~ wall connector.
Specifications:
Capacity
Input voltage : 230
Output voltage: 12
Cable length (m): 3,25
General
Type: Power supply
Type of buil..
129.00€
Ex Tax:106.61€
Brand: iOptron
Product Code: 58542
Product description:
This secondary dovetail saddle kit fits on all iOptron Cube mounts, including CubePro, Cube-E, Cube-G and Cube-A mounts. It accepts a Vixen style dovetail bar. The mounting block has a 1/4" mounting screw. A camera can be mounted onto it with a ball head.
(Telescope, mount, ..
139.00€
Ex Tax:114.88€
Brand: iOptron
Product Code: 73848
Product description:
Specially designed counterweight kit for Z-Axis balance.
It fits on the following iOptron mounts (has M8 threaded holes on the dovetail saddle):
CEM120
CEM70
CEM40 (version with THICK 6" V/D dual saddle, except CEM40G)
GEM45 (version with THICK 6" V/D dual saddle, exce..
139.00€
Ex Tax:114.88€