Ermenrich NetGeeks NP40 Digital Cable Tracker
- Availability: In another stock
- Brand: Ermenrich
- Product Code: L_82550
- Weight: 0.52kg
- Dimensions: 23.00cm x 16.50cm x 5.00cm
- EAN: 5905555016948
This offer ends in:
Available Options
The Ermenrich NetGeeks NP40 multifunctional is a digital cable tester that is designed for tracing twisted pair and telephony, testing lines for faults and installation errors, measuring cable lengths and the distance to open or short circuits. The device will become an effective tool for technicians deploying and maintaining a computer or telephone network in an office, at a facility, or at home.
In the base mode of operation, the device can check the wires within the cable for damage: open circuits, short circuits, crossed pairs. In the cable length measurement mode, you can measure the total cable length within 200 meters as well as the distance to the break. TDR measurements, high accuracy, and calibration can be performed, if needed.
The Port Flash function can be used to find the exact port on the network switch or router to which the target cable is connected. The PoE test identifies the PSE type and detects midspan/endspan. The device also measures voltage and polarity. The tester receiver can be set to NCV mode for non-contact voltage detection.
The transmitter and receiver are powered by batteries (not included).
Key features:
- Cable tracing, testing lines for faults and installation errors
- Cable length measurement with the TDR technique (pulse reflectometry)
- Measuring the distance to open or short circuits
- PoE test with voltage measurement, identification of a PSE type, midspan/endspan identification
- Port Flash and NCV functions, powered by batteries
The kit includes:
- Transmitter
- Receiver
- Remote unit
- RJ11 patch cord
- RJ45 patch cord
- Alligator clip
- DC cable
- Earbuds
- Type-C USB cable
- Carry bag
- User manual and warranty card
Brand | Ermenrich |
Warranty, years | 5 |
EAN | 5905555016948 |
Package size (LxWxH), cm | 23x16.5x4.5 |
Shipping Weight, kg | 0.43 |
Cable length measurement | yes |
Cable tracing | yes |
PoE test | yes |
Voltage polarity detection | yes |
Measuring range, m | 2.5 — 200 |
Error | 3 (±0.5m/1.6ft) |
Measuring the distance to open circuits | yes |
Measuring the distance to short circuit | yes |
=== Delimiter === | PoE test |
Midspan/endspan identification | yes |
Operating voltage range (DC), V | 5 — 60 |
Display resolution, px | 128х64 |
Display backlight | yes |
Ports | PoE, Scan, Length/Flash, Cont |
Tracing cable types | telephone, common wires, STP/UTP (CAT5E, CAT6, CAT6A) network cable |
Testing cable types | STP/UTP (CAT5E, CAT6, CAT6A) network cable |
Maximum length of the tested cable, m (ft) | 600 (1970) |
Cable testing | + (open circuits, short circuits, crossed pairs, reversed pairs, split pairs, crosstalk) |
Port flash function | +, (full duplex/half duplex, auto-nego/non-auto-nego, 10/100/1000Mbit/s) |
Measuring method | Time-domain pulse reflectometry (TDR) |
Units of measurement | meters/yards, feet |
Calibration | + |
Minimum cable length for calibration, m (ft) | 10 (32.8) |
Calibration error, % | 2 (±0.5m/1.6ft) |
Power source equipment (PSE) type test | standard (IEEE 802.3at/af)/non-standard |
Maximum operating current, mA | <150 |
Protection | input voltage: 48V, current: 5mA |
Display | LCD |
Power supply | charging via a USB Type-C cable (included), 3 rechargeable AAA batteries (not included) |
Low battery status indicator | yes |
Auto power off | 15 min, 60 min, 30 min |
Operating temperature range,°C | −10… +60 (14… 140) |
Operating humidity range, % | 20…70 |
Ports | RJ45, earbuds |
Adjustable sensitivity | yes |
Non-contact voltage detection (NCV) | yes |
Flash light | yes |
Maximum operating current, mA | <100 |
Power supply | 9V battery (not included) |
Operating temperature range,°C | −10… +60 (14… 140) |
Operating humidity range, % | 20…70 |